packet tracer (router)
o Fa1/0 : 205.7.5.1
o Se2/0 : 201.100.11.1
o SM : 255.255.255.0
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Router
Router(config)#int fa 0/0
Router(config-if)#ip add 192.5.5.1 255.255.255.0
Router(config-if)#no shut
Router (config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upexit
Router (config)#
Router (config)#int fa 1/0
Router (config-if)#ip add 205.7.5.1 255.255.255.0
Router (config-if)#no shut
Router (config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router(config-if)#exit
Router(config)#int ser 0/0
%Invalid interface type and number
Router(config)#int se0/0
%Invalid interface type and number
Router(config)#int serial 0/0
%Invalid interface type and number
Router(config)#int serial2/0
Router(config-if)#ip add 201.100.11.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit
Router(config)#exit
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 0.0.0.0 0.0.0.0 201.100.11.2
Router(config)#exit
Router#show ip route
Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP
D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area
N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2
E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP
i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area
* – candidate default, U – per-user static route, o – ODR
P – periodic downloaded static route
Gateway of last resort is 201.100.11.2 to network 0.0.0.0
C 192.5.5.0/24 is directly connected, FastEthernet0/0
C 201.100.11.0/24 is directly connected, Serial2/0
C 205.7.5.0/24 is directly connected, FastEthernet1/0
S* 0.0.0.0/0 [1/0] via 201.100.11.2
Router#wr mem
Building configuration…
[OK]
9. Setting Router Lab_B sebagai berikut:
o Fa0/0 : 219.17.100.1
o Se2/0 : 201.100.11.2
o Se3/0 : 199.6.13.1
o SM : 255.255.255.0
ROUTER Lab_B
Router>ena
Router#conft
Translating “conft”…domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Router
Router(config)#int fa0/0
Router(config-if)#ip add 219.17.100.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip add 201.100.11.2 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to upexit
Router(config)#
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to upint
% Incomplete command.
Router(config)#int se3/0
Router(config-if)#ip add 199.6.13.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#exit
Router(config)#ip route 0.0.0.0 0.0.0.0 201.100.11.1
Router(config)#ip route 0.0.0.0 0.0.0.0 199.6.13.2
Router(config)#exit
Router#show ip route
Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP
D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area
N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2
E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP
i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area
* – candidate default, U – per-user static route, o – ODR
P – periodic downloaded static route
Gateway of last resort is 199.6.13.2 to network 0.0.0.0
C 199.6.13.0/24 is directly connected, Serial3/0
C 201.100.11.0/24 is directly connected, Serial2/0
C 219.17.100.0/24 is directly connected, FastEthernet0/0
S* 0.0.0.0/0 [1/0] via 199.6.13.2
[1/0] via 201.100.11.1
Router #wr mem
Building configuration…
[OK]
10. Setting Router Lab_C sebagai berikut:
o Fa0/0 : 223.8.151.1
o Se2/0 : 199.6.13.2
o Se3/0 : 204.204.7.1
o SM : 255.255.255.0
ROUTER Lab_C
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Router
Router(config)#int fa0/0
Router(config-if)#ip add 223.8.151.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upexit
Router(config)#int se2/0
Router(config-if)#ip add 199.6.13.2 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Router(config-if)#exit
Router(config)#int se
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up3/0
Router(config-if)#ip add 204.204.7.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#exit
Router(config)#ip route 0.0.0.0 0.0.0.0 199.6.13.1
Router(config)#ip route 0.0.0.0 0.0.0.0 204.204.7.2
Router(config)#exit
Router#show ip route
Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP
D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area
N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2
E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP
i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area
* – candidate default, U – per-user static route, o – ODR
P – periodic downloaded static route
Gateway of last resort is 204.204.7.2 to network 0.0.0.0
C 199.6.13.0/24 is directly connected, Serial2/0
C 204.204.7.0/24 is directly connected, Serial3/0
C 223.8.151.0/24 is directly connected, FastEthernet0/0
S* 0.0.0.0/0 [1/0] via 204.204.7.2
[1/0] via 199.6.13.1
Router#wr mem
Building configuration…
[OK]
11. Setting Router Lab_D sebagai berikut:
o Fa0/0 : 210.93.105.1
o Se2/0 : 204.204.7.2
o SM : 255.255.255.0
ROUTER LAB_D
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Router
Router(config)#int se2/0
Router(config-if)#ip add 204.204.7.2 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Router(config-if)#exit
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
Router(config)#int fa0/0
Router(config-if)#ip add 210.93.105.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#^Z
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#wr mem
Building configuration…
[OK]
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 210.93.105.2
% Incomplete command.
Router(config)#ip route 0.0.0.0 0.0.0.0 210.93.105.2
Router(config)#ip route 0.0.0.0 0.0.0.0 204.204.7.1
Router(config)#exit
Router#show ip route
Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP
D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area
N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2
E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP
i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area
* – candidate default, U – per-user static route, o – ODR
P – periodic downloaded static route
Gateway of last resort is 210.93.105.2 to network 0.0.0.0
C 204.204.7.0/24 is directly connected, Serial2/0
C 210.93.105.0/24 is directly connected, FastEthernet0/0
S* 0.0.0.0/0 [1/0] via 210.93.105.2
Router#wr mem
Building configuration…
[OK]
12. Setting Router Lab_E sebagai berikut:
o Fa0/0 : 210.93.105.2
ROUTER Lab_E
Router>ena
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname Router
Router(config)#int fa0/0
Router(config-if)#ip add 210.93.105.2 255.255.255.0
Router(config-if)#no shut
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#^Z
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#wr mem
Building configuration…
[OK]
Router#
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 0.0.0.0 0.0.0.0 210.93.105.1
Router(config)#exit
Router#show ip route
Codes: C – connected, S – static, I – IGRP, R – RIP, M – mobile, B – BGP
D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area
N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2
E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP
i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area
* – candidate default, U – per-user static route, o – ODR
P – periodic downloaded static route
Gateway of last resort is 210.93.105.1 to network 0.0.0.0
C 210.93.105.0/24 is directly connected, FastEthernet0/0
S* 0.0.0.0/0 [1/0] via 210.93.105.1
Router# wr mem
[OK]
13. Setting IP PC0 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 205.7.5.2
o Subnet Mask : 255.255.255.0
o Default Gateway : 205.7.5.1
14. Setting IP PC1 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 205.7.5.3
o Subnet Mask : 255.255.255.0
o Default Gateway : 205.7.5.1
15. Setting IP PC2 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 192.5.5.2
o Subnet Mask : 255.255.255.0
o Default Gateway : 192.5.5.1
16. Setting IP PC3 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 192.5.5.3
o Subnet Mask : 255.255.255.0
o Default Gateway : 192.5.5.1
17. Setting IP PC4 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 219.17.100.2
o Subnet Mask : 255.255.255.0
o Default Gateway : 219.17.100.1
18. Setting IP PC5 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 219.17.100.3
o Subnet Mask : 255.255.255.0
o Default Gateway : 219.17.100.1
19. Setting IP PC6 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 223.8.151.2
o Subnet Mask : 255.255.255.0
o Default Gateway : 223.8.151.1
20. Setting IP PC7 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 223.8.151.3
o Subnet Mask : 255.255.255.0
o Default Gateway : 223.8.151.1
21. Setting IP PC8 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 210.93.105.3
o Subnet Mask : 255.255.255.0
o Default Gateway : 210.93.105.2
22. Setting IP PC9 seperti di bawah ini, atau bisa menggunakan IP lain dengan catatan masih satu network
o IP address : 210.93.105.4
o Subnet Mask : 255.255.255.0
o Default Gateway : 210.93.105.2
Nah sekarang tinggal cek Koneksinya, untuk itu bisa gunakan Command Prompt dengan perintah “Ping [IP yang di tuju]
Kalau hasilnya “Replay from…………….” Berarti berhasil (connact).
- Cek Koneksi antara PC0 dengan PC1
PC>ping 205.7.5.3
Pinging 205.7.5.3 with 32 bytes of data:
Reply from 205.7.5.3: bytes=32 time=125ms TTL=128
Reply from 205.7.5.3: bytes=32 time=63ms TTL=128
Reply from 205.7.5.3: bytes=32 time=47ms TTL=128
Reply from 205.7.5.3: bytes=32 time=62ms TTL=128
Ping statistics for 205.7.5.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 47ms, Maximum = 125ms, Average = 74ms
- Cek Koneksi antara PC0 dengan PC2
PC>ping 192.5.5.2
Pinging 192.5.5.2 with 32 bytes of data:
Reply from 192.5.5.2: bytes=32 time=110ms TTL=127
Reply from 192.5.5.2: bytes=32 time=82ms TTL=127
Reply from 192.5.5.2: bytes=32 time=94ms TTL=127
Reply from 192.5.5.2: bytes=32 time=110ms TTL=127
Ping statistics for 192.5.5.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 82ms, Maximum = 110ms, Average = 99ms
- Cek Koneksi antara PC0 dengan PC3
PC>ping 192.5.5.3
Pinging 192.5.5.3 with 32 bytes of data:
Reply from 192.5.5.3: bytes=32 time=125ms TTL=127
Reply from 192.5.5.3: bytes=32 time=112ms TTL=127
Reply from 192.5.5.3: bytes=32 time=94ms TTL=127
Reply from 192.5.5.3: bytes=32 time=77ms TTL=127
Ping statistics for 192.5.5.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 77ms, Maximum = 125ms, Average = 102ms
- Cek Koneksi antara PC0 dengan PC4
PC>ping 219.17.100.2
Pinging 219.17.100.2 with 32 bytes of data:
Reply from 219.17.100.2: bytes=32 time=218ms TTL=120
Reply from 219.17.100.2: bytes=32 time=281ms TTL=120
Reply from 219.17.100.2: bytes=32 time=250ms TTL=120
Reply from 219.17.100.2: bytes=32 time=235ms TTL=120
Ping statistics for 219.17.100.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 218ms, Maximum = 281ms, Average = 246ms
- Cek Koneksi antara PC0 dengan PC5
PC>ping 219.17.100.3
Pinging 219.17.100.3 with 32 bytes of data:
Reply from 219.17.100.3: bytes=32 time=266ms TTL=120
Reply from 219.17.100.3: bytes=32 time=252ms TTL=120
Reply from 219.17.100.3: bytes=32 time=247ms TTL=120
Reply from 219.17.100.3: bytes=32 time=281ms TTL=120
Ping statistics for 219.17.100.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 247ms, Maximum = 281ms, Average = 261ms
- Cek Koneksi antara PC0 dengan PC6
PC>ping 223.8.151.2
Pinging 223.8.151.2 with 32 bytes of data:
Reply from 223.8.151.2: bytes=32 time=281ms TTL=121
Reply from 223.8.151.2: bytes=32 time=246ms TTL=121
Reply from 223.8.151.2: bytes=32 time=265ms TTL=121
Reply from 223.8.151.2: bytes=32 time=281ms TTL=121
Ping statistics for 223.8.151.2:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 246ms, Maximum = 281ms, Average = 268ms
- Cek Koneksi antara PC0 dengan PC7
PC>ping 223.8.151.3
Pinging 223.8.151.3 with 32 bytes of data:
Reply from 223.8.151.3: bytes=32 time=250ms TTL=121
Reply from 223.8.151.3: bytes=32 time=231ms TTL=121
Reply from 223.8.151.3: bytes=32 time=250ms TTL=121
Reply from 223.8.151.3: bytes=32 time=187ms TTL=121
Ping statistics for 223.8.151.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 187ms, Maximum = 250ms, Average = 229ms
- Cek Koneksi antara PC0 dengan PC8
PC>ping 210.93.105.3
Pinging 210.93.105.3 with 32 bytes of data:
Reply from 210.93.105.3: bytes=32 time=281ms TTL=121
Reply from 210.93.105.3: bytes=32 time=294ms TTL=121
Reply from 210.93.105.3: bytes=32 time=252ms TTL=121
Reply from 210.93.105.3: bytes=32 time=219ms TTL=121
Ping statistics for 210.93.105.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 219ms, Maximum = 294ms, Average = 261ms
- Cek Koneksi antara PC0 dengan PC9
PC>ping 210.93.105.4
Pinging 210.93.105.4 with 32 bytes of data:
Reply from 210.93.105.4: bytes=32 time=219ms TTL=121
Reply from 210.93.105.4: bytes=32 time=252ms TTL=121
Reply from 210.93.105.4: bytes=32 time=291ms TTL=121
Reply from 210.93.105.4: bytes=32 time=281ms TTL=121
Ping statistics for 210.93.105.4:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 219ms, Maximum = 291ms, Average = 260ms
Tidak ada komentar:
Posting Komentar